Opening
In this article, we help you create the Chaotic Time: An Avant-Garde Clock Laser Cutting Creation.
Create this stunning avant-garde clock using a laser cutter by designing the dynamic arrangement of scattered numbers. Cut the pieces from acrylic or wood, assemble them around the central clock mechanism, and mount it on your wall. This project is perfect for adding a modern touch to any space.
- The Chaotic Time: An Avant-Garde Clock laser cutting Creation is a wall clock.
- Commonly given as a gift for all ages.
- This laser cutting project uses acryllc .
- It is an an intermediate Creation, and I believe this can be completed in 90 minutes.
However, the completion duration will depend on the laser cutter you are working with, how large the project is, and your experience using similar designs. If you think the estimated timing should be adjusted, don’t hesitate to let me know via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Build instructions
Step 1. Get materials prepared for the project - Acrylic: Choose the acrylic colour and use a protective film if required. - Clock mechanism: Purchase the appropriate clock mechanism and hand colour. Ensure your clock mechanism has a sufficiently long shaft to allow the shaft to pass through the acrylic. Step 2. Prepare the design file for laser cutting - download the design file using the source link supplied on the project page. - Unzip the file to access the SVG. - Load the SVG into your laser cutting software. Step 3. Prepare the laser cutter for cutting - Adjust the design size to fit your chosen material dimensions. - Ensure the middle hole is sufficiently large to fit the clock mechanism. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Use the manufacturer’s guidance when selecting material-specific parameters. Step 4. Carry out the laser cutting steps - Position the material evenly on the laser bed. - Run the cutting process. Step 5. Clean and finish the cut pieces - For Acrylic: Remove any protective film from the materials after cutting. Step 6. Assemble the cut components - Attach the clock mechanism and hands. Step 7. Attach mounting hardware - Attach a hook to the wall and hang the clock. With the final step done, you’ve completed Chaotic Time: An Avant-Garde Clock! Hang it in your chosen spot and enjoy the finished piece.
If you enjoyed this project, please share your experience and leave a comment below.
Stuck and need help?
- 25 Common Laser Cutting Mistakes and How to Avoid Them
- xTool P2 Laser Cutter
- Create sample swatches of your paints, stains and dyes for laser cutting
- Leave a question
The completed Chaotic Time: An Avant-Garde Clock
