Introduction
In this post, we help you create the Colorful Cats Purrfect Pop Art Laser Cutting Project.
Brighten your wall with this contemporary 8-layer artwork featuring four colourful cats. Crafted from paper stock, acrylic, MDF, or plywood, this vibrant piece is perfect for both children and adults. Its playful design and bold hues add a touch of whimsy and charm to any room, making it a delightful focal point.
The Colorful Cats Purrfect Pop Art laser cutting project is a wall artwork.
Suitable as a gift for all ages.
The project uses acrylic or MDF or plywood.
It is an an intermediate project, and I estimate the project can be completed in 4 hours for MDF, 3.5 hours for plywood or 3 hours for acrylic. However, your completion time will depend on the laser cutter, the dimensions of the project and your skill level. If you think my time estimates need adjustment, please feel free to let me know via a comment below.
The paid design can be downloaded here. (please notify me if the link is down)
Instructions
1. Prepare the Materials
- Acrylic: Choose acrylics to match the example and use a protective film if required.
- MDF: Prepare MDF by painting it with a white undercoat and selecting paint colours to finish after the laser cutting.
- Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture.
2. Prepare the Design File
- Download the design file from the source link provided on the project page.
- Unzip the file to access the design.
- Load the design into your laser cutting software.
3. Set Up the Laser Cutter
- Adjust the design size to fit your chosen material dimensions.
- Set the appropriate laser parameters:
- Cut: Specify power and speed for clean cuts.
- For the material-specific settings, refer to your laser cutter’s guidelines.
4. Use the Laser Cutter
- Place your material on the laser bed.
- Run the cutting process for all required layers.
- Ensure that the layers align correctly as they are cut.
5. Following Laser Cutting
- For MDF: Wipe smoke marks away with a slightly damp rag. Paint the layers with your chosen colours. Spray paint is preferable to canned paint.
- For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye.
- For Acrylic: Remove any protective film from the material after cutting.
6. Assemble the Layers
- Align the layers carefully to ensure proper alignment of the design.
- Use appropriate adhesives:
- Acrylic Adhesive for acrylic.
- Wood Glue for MDF or plywood.
- Use clamps to secure the layers while the adhesive dries.
- For MDF and plywood, use a gloss spray to enhance and protect the artwork.
7. Prepare for Wall Mounting
- As the artwork is heavy, take it to a professional service and get advice about how to place it on your wall. Alternatively, place it on a shelf where it will lean against a wall.
Congratulations on completing your Colorful Cats Purrfect Pop Art! Hang it in your chosen spot and admire the beautiful craftsmanship.
If you enjoyed this project, please share your experience and leave a comment below.
Need help?
- Unsure of the colours to use? Create colour swatches
- View the materials and tools I used to create the items
- View my 50 laser cutting tips
- Leave a question
The completed Colorful Cats Purrfect Pop Art
