Summary
In this post, we help you create the Dolphin Dive into the Deep Blue Laser Cutting Build.
Make a splash with this vibrant multi-layered dolphin-shaped artwork! Inside the dolphin silhouette, you'll discover a lively underwater scene filled with coral, fish, and sea plants, all set against a bright ocean-blue background. Perfect for ocean lovers and creative crafters, this laser-cut project is a fun way to add coastal charm to any space. Download the design file, follow the tips, and craft this stunning piece for yourself or as a thoughtful gift.
- The Dolphin Dive into the Deep Blue laser cutting Build is a wall artwork.
- Commonly given as a gift for all ages.
- This project uses plywood.
- It is an an intermediate Build, and I estimate this can be completed in 2.5 hours.
However, the time it takes to complete this design will depend on the laser cutter used, how large the project is, and your familiarity with laser cutting. If you think the estimated timing should be adjusted, feedback is welcome via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Assembly instructions
Step 1. Get your materials ready - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Download and open the design file - download the design file using the source link found on the project page. - Unzip the file to access the SVG. - Load the SVG into your laser cutting software. Step 3. Configure the cutter for this project - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Follow your laser cutter’s recommended settings for each material type. Step 4. Begin cutting the project - Place the material correctly on the laser bed. - Run the cutting process. Step 5. Complete finishing after cutting - For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye. Step 6. Assemble the cut components - Align the layers carefully to ensure proper alignment of the design. - Use appropriate adhesives: - Wood Glue for plywood. - Use clamps to secure the layers while the adhesive dries. - A gloss spray enhances and protects the artwork for plywood. Step 7. Get the finished project ready to display - Attach a hanging mechanism, such as adhesive strips, to the back of the artwork. - Verify that the mechanism is suitable for the wall surface. After working through the steps, you’ve completed Dolphin Dive into the Deep Blue! Take a moment to admire the craftsmanship and enjoy the finished result.
If you enjoyed this project, please share your experience and leave a comment below.
Need help with this build?
- Laser Cutting: A Beginner’s Guide to Getting Started
- xTool P2 Laser Cutter
- Laser cut items – masking vs cleaning with a wet rag
- Leave a question
The completed Dolphin Dive into the Deep Blue
