Overview
In this webpage, we help you create the Frame the Fur-tastic Cats Laser Cutting Creation.
Add a touch of feline flair to your home with these colorful laser-cut cat silhouettes! Featuring three unique designs—a sitting cat, a walking cat, and a playful cat stretching—each silhouette is framed for a modern and sleek look. This project is easy to make and perfect for cat lovers. Download the design files, follow the instructions, and create these vibrant pieces for yourself or as gifts. Ideal for wall art or fun décor projects!
- The Frame the Fur-tastic Cats laser cutting Creation is a wall artwork.
- An excellent gift option for all ages.
- The design uses acrylic or MDF or Plywood.
- It is an an easy Creation, and it can typically be completed in 1.5 hours for acrylic, 2.5 hours for MDF and 2 hours for plywood.
However, the completion timeframe will depend on the laser cutter you use, the finished size of the design, and your confidence with laser cutting. If you believe the completion time should be adjusted, feedback is welcome via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Beginner-friendly instructions
Step 1. Begin with material preparation - Acrylic: Choose the acrylic colours and use a protective film if required. - MDF: Prepare MDF by painting it with a white undercoat and selecting paint colours to finish after the laser cutting. - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Download and open the design file - download the project design file from the source link available on the project page. - Unzip the file to access the SVG. - Load the SVG into your laser cutting software. Step 3. Set laser parameters for cutting - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Review your laser cutter’s documentation for material-based settings. Step 4. Carry out the laser cutting steps - Place the selected material onto the laser bed. - Run the cutting process. Step 5. Complete finishing after cutting - For MDF: Use a damp cloth to remove smoke marks. Paint the layers once clean. Spray paint gives the best finish. - For Plywood: Clean smoke residue with a damp rag, then apply stain or dye. - For Acrylic: Remove protective film after cutting. Step 6. Assemble the finished layers - Attach a hanging mechanism, such as adhesive strips, to the back of the artwork. - Verify that the mechanism is suitable for the wall surface. With the final step done, you’ve completed Frame the Fur-tastic Cats! It’s now ready to be displayed and enjoyed.
If you enjoyed this project, please share your experience and leave a comment below.
Need support with assembly?
- Create sample swatches of your paints, stains and dyes for laser cutting
- 25 Common Laser Cutting Mistakes and How to Avoid Them
- 50 Laser Cutting tips
- Leave a question
The completed Frame the Fur-tastic Cats
