Opening
In this post, we help you create the Hump Day laser cutting Laser Cutting Work.
Bring the beauty of the desert into your home with this stunning laser-cut camel artwork! The camel silhouette frames a vibrant desert landscape, complete with layered sand dunes, rocky outcrops, and a distant mountain range. Perfect for craft enthusiasts and nature lovers, this project is easy to complete using the provided SVG file and handy cutting tips.
- The Hump Day laser cutting laser cutting Work is a wall artwork.
- A meaningful gift for all ages.
- The construction uses plywood.
- It is an an easy Work, and I estimate the project can be completed in 2.5 hours.
However, the time required for completion will depend on the laser cutter you use, the scale of the project, and your comfort level with laser cutting. If you believe the estimated timing should be adjusted, please let me know via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Build instructions
Step 1. Select and prepare your materials - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Prepare the design file for laser cutting - download the design file using the source link found on the project page. - Unzip the file to access the SVG. - Load the SVG into your laser cutting software. Step 3. Configure the laser cutter - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Refer to the laser cutter manual for recommended material settings. Step 4. Start cutting the design - Lay the material flat on the laser bed. - Run the cutting process. Step 5. Complete finishing after cutting - For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye. Step 6. Join the layers together - Align the layers carefully to ensure proper alignment of the design. - Use appropriate adhesives: - Wood Glue for plywood. - Use clamps to secure the layers while the adhesive dries. - A gloss spray enhances and protects the artwork for plywood. - Attach a hanging mechanism, such as adhesive strips, to the back of the artwork. - Verify that the mechanism is suitable for the wall surface. You’ve now completed Hump Day laser cutting! Find the perfect place to display it and enjoy the final outcome.
If you enjoyed this project, please share your experience and leave a comment below.
Need some help?
- xTool P2 Laser Cutter
- 25 Common Laser Cutting Mistakes and How to Avoid Them
- Laser Cutting: A Beginner’s Guide to Getting Started
- Leave a question
The completed Hump Day laser cutting
