Introduction
In this post, we help you create the Laser-Cut Catitude Laser Cutting Project.
This unique layered cat artwork is a perfect laser cutting project for animal lovers and craft enthusiasts. With downloadable design files and tips, you can create this elegant cat with intricate layers and a flowing pattern of wood tones. Display it as wall art or gift it to a friend who loves cats!
The Laser-Cut Catitude laser cutting project is a wall artwork.
Suitable as a gift for all ages.
The project uses plywood.
It is an an intermediate project, and I estimate the project can be completed in 2.25 hours. However, your completion time will depend on the laser cutter, the dimensions of the project and your skill level. If you think my time estimates need adjustment, please feel free to let me know via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Instructions
1. Prepare the Materials
- Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture.
2. Prepare the Design File
- Download the design file from the source link provided on the project page.
- Unzip the file to access the SVG.
- Load the SVG into your laser cutting software.
3. Set Up the Laser Cutter
- Adjust the design size to fit your chosen material dimensions.
- Set the appropriate laser parameters:
- Cut: Specify power and speed for clean cuts.
- For the material-specific settings, refer to your laser cutter’s guidelines.
4. Use the Laser Cutter
- Place your material on the laser bed.
- Run the cutting process.
5. Following Laser Cutting
- For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye.
6. Assemble the Layers
- Align the layers carefully to ensure proper alignment of the design.
- Use appropriate adhesives:
- Wood Glue for plywood.
- Use clamps to secure the layers while the adhesive dries.
- A gloss spray enhances and protects the artwork for plywood.
7. Prepare for Wall Mounting
- Attach a hanging mechanism, such as adhesive strips, to the back of the artwork.
- Verify that the mechanism is suitable for the wall surface.
Congratulations on completing your Laser-Cut Catitude! Hang it in your chosen spot and admire the beautiful craftsmanship.
If you enjoyed this project, please share your experience and leave a comment below.
Need help?
- Unsure of the colours to use? Create colour swatches
- View the materials and tools I used to create the items
- View my 50 laser cutting tips
- Leave a question
The completed Laser-Cut Catitude
