Introduction
In this project, we help you create the Laser-Cut Catitude Laser Cutting Project.
This unique layered cat artwork is a perfect laser cutting project for animal lovers and craft enthusiasts. With downloadable design files and tips, you can create this elegant cat with intricate layers and a flowing pattern of wood tones. Display it as wall art or gift it to a friend who loves cats!
- The Laser-Cut Catitude laser cutting Project is a wall artwork.
- Suitable as a gift for all ages.
- The project is constructed using plywood.
- It is an an intermediate Project, and it is estimated to be completed in 2.25 hours.
However, how long this takes to complete will depend on the laser cutter being used, the final dimensions of the design, and your comfort level with laser cutting. If you think the time estimate should be adjusted, feel free to let me know via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Build guide
Step 1. Select and prepare your materials - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Access and prepare the design files - download the design file via the provided source link included on the project page. - Unzip the file to access the SVG. - Load the SVG into your laser cutting software. Step 3. Adjust laser settings as required - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Refer to the laser cutter manual for recommended material settings. Step 4. Proceed with laser cutting - Lay the material flat on the laser bed. - Run the cutting process. Step 5. Prepare cut parts for assembly - For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye. Step 6. Build the final layered design - Align the layers carefully to ensure proper alignment of the design. - Use appropriate adhesives: - Wood Glue for plywood. - Use clamps to secure the layers while the adhesive dries. - A gloss spray enhances and protects the artwork for plywood. Step 7. Get the finished project ready to display - Attach a hanging mechanism, such as adhesive strips, to the back of the artwork. - Verify that the mechanism is suitable for the wall surface. After working through the steps, you’ve completed Laser-Cut Catitude! Your project is complete and ready to be enjoyed.
If you enjoyed this project, please share your experience and leave a comment below.
Stuck and need help?
- Create sample swatches of your paints, stains and dyes for laser cutting
- 50 Laser Cutting tips
- 25 Common Laser Cutting Mistakes and How to Avoid Them
- Leave a question
The completed Laser-Cut Catitude
