Outline
In this article, we help you create the Minimalist Woman Silhouette Laser Cutting Work.
This contemporary acrylic artwork features a minimalist depiction of a woman wearing a skirt. Crafted from a single layer of acrylic, its clean lines and striking silhouette make it a perfect addition to any adult's wall. This unique piece adds a touch of modern sophistication to any room.
- The Minimalist Woman Silhouette laser cutting Work is a wall artwork.
- Suitable as a gift for adults.
- This project uses acrylic or MDF or plywood.
- It is an an easy Work, and I estimate it should be completed in 1 hour for acrylic, 1.5 hours for plywood, or 2 hours for MDF.
However, the time required for completion will depend on the laser cutter you use, the scale of the project, and your experience using similar designs. If you think the estimated timing should be adjusted, please provide feedback via a comment below.
The paid design can be downloaded here. (please notify me if the link is down)
Assembly instructions
Step 1. Prepare the required materials - Acrylic: Choose the acrylic colour and use a protective film if required. - MDF: Prepare MDF by painting it with a white undercoat and selecting a paint colour to finish after the laser cutting. - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Download and prepare the design file - use the source link to download the design file available on the project page. - extract the downloaded file to access the design. - load the design file into your laser cutting software. Step 3. Prepare laser cutter settings - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Use the manufacturer’s guidance when selecting material-specific parameters. Step 4. Carry out the laser cutting steps - Set the material in place on the laser bed. - Run the cutting process. Step 5. Prepare pieces for assembly - For MDF: Use a damp cloth to remove smoke marks. Paint the layers once clean. Spray paint gives the best finish. - For Plywood: Clean smoke residue with a damp rag, then apply stain or dye. - For Acrylic: Remove protective film after cutting. Step 6. Assemble and secure all layers - Attach a hanging mechanism, such as adhesive strips, to the back of the artwork. - Verify that the mechanism is suitable for the wall surface. Fantastic work completing Minimalist Woman Silhouette! Enjoy the finished design and the satisfaction of making it yourself.
If you enjoyed this project, please share your experience and leave a comment below.
Need some help?
- Leave a question
The completed Minimalist Woman Silhouette
