Outline
In this page, we help you create the Musical Mosaic Symphony Laser Cutting Design.
This vibrant laser-cut artwork features a bold and colourful guitar surrounded by microphones and soundwaves in a psychedelic-inspired design. The multi-layered composition, filled with rich orange, yellow, green, and red hues, creates a sense of dynamic movement. This piece captures the energy of live performances and musical expression, perfect for music lovers. It’s an eye-catching decorative piece, ideal for a creative studio, music room, or modern living space.
- The Musical Mosaic Symphony laser cutting Design is a wall artwork.
- Perfect as a gift for all ages.
- This design uses acrylic or MDF or plywood.
- It is an a challenging Design, and it can usually be completed in 6 hours for MDF, 5.25 hours for plywood or 4.75 hours for acrylic.
However, the overall completion time will depend on the laser cutter you are using, the scale of the project, and your familiarity with laser cutting. If you believe the timing should be adjusted, don’t hesitate to let me know via a comment below.
The paid design can be downloaded here. (please notify me if the link is down)
Assembly guide
Step 1. Get materials prepared for the project - MDF: Prepare MDF by painting it with a white undercoat and selecting paint colours to finish after the laser cutting. - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Set up the design file in your software - download the design file via the provided source link available on the project page. - unzip the file to open the design. - load the design into your preferred laser software. Step 3. Adjust laser settings as required - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Refer to your laser cutter’s guidelines for material-specific settings. Step 4. Proceed with laser cutting - Place your chosen material onto the laser bed surface. - Run the cutting process for all required layers. - Ensure that the layers align correctly as they are cut. Step 5. Clean up after laser cutting - For MDF: Wipe smoke marks away with a slightly damp rag. Paint the layers with your chosen colours. Spray paint is preferable to canned paint. - For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye. Step 6. Secure and assemble all layers - Align the layers carefully to ensure proper alignment of the design. - Use appropriate adhesives: - Wood Glue for MDF or plywood. - Use clamps to secure the layers while the adhesive dries. - For MDF and plywood, use a gloss spray to enhance and protect the artwork. Step 7. Get the piece ready to hang - As the artwork is heavy, take it to a professional service and get advice about how to place it on your wall. Alternatively, place it on a shelf where it will lean against a wall. You’ve now completed Musical Mosaic Symphony! Take a moment to admire the craftsmanship and enjoy the finished result.
If you enjoyed this project, please share your experience and leave a comment below.
Not sure where to start?
- Create sample swatches of your paints, stains and dyes for laser cutting
- 50 Laser Cutting tips
- xTool P2 Laser Cutter
- Leave a question
The completed Musical Mosaic Symphony
