Summary
In this project, we help you create the Pug Pose: Stretch, Wag, Repeat! Laser Cutting Design.
Create a layered wooden pug that captures this popular breed's playful and lovable nature! This unique laser-cut design features a stretching pug with intricate layers that add depth and character. Whether you want to display it at home, gift it to a fellow dog lover, or make it a fun addition to your craft collection, this design is a must-try. Get the SVG files and tips and bring this adorable pup to life today!
- The Pug Pose: Stretch, Wag, Repeat! laser cutting Design is a wall artwork.
- Often chosen as a gift for all ages.
- This design uses plywood.
- It is an an easy Design, and I believe it can be completed in 2.25 hours.
However, the time it takes to complete this design will depend on the laser cutter used, the dimensions of the project, and how experienced you are. If you believe the time estimate should be adjusted, feel free to share your thoughts via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Making guide
Step 1. Start by preparing your materials - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Download and prepare the design file - download the project design file from the source link listed on the project page. - Unzip the file to access the SVG. - Load the SVG into your laser cutting software. Step 3. Prepare the laser cutter for cutting - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Consult the manufacturer’s guidelines for settings specific to each material. Step 4. Start cutting the design - Place your chosen material onto the laser bed surface. - Run the cutting process. Step 5. Clean and prepare pieces after cutting - For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye. Step 6. Assemble the cut components - Align the layers carefully to ensure proper alignment of the design. - Use appropriate adhesives: - Wood Glue for plywood. - Use clamps to secure the layers while the adhesive dries. - A gloss spray enhances and protects the artwork for plywood. - Attach a hanging mechanism, such as adhesive strips, to the back of the artwork. - Verify that the mechanism is suitable for the wall surface. With the final step done, you’ve completed Pug Pose: Stretch, Wag, Repeat!! Your project is complete and ready to be enjoyed.
If you enjoyed this project, please share your experience and leave a comment below.
Looking for help?
- Create sample swatches of your paints, stains and dyes for laser cutting
- Laser cut items – masking vs cleaning with a wet rag
- xTool P2 Laser Cutter
- Leave a question
The completed Pug Pose: Stretch, Wag, Repeat!
