Introduction
In this post, we help you create the Speedway in Miniature: The Ultimate Car Ramp Challenge Laser Cutting Project.
Get ready to ignite your child’s imagination with this laser-cut car ramp! Perfect for little race car enthusiasts, this three-level ramp structure is crafted from sturdy wood and features smooth, curvy tracks that make toy cars zoom down with thrilling speed. The ramp’s design is simple yet captivating, ensuring hours of fun. Download the design files and follow the easy instructions to create this exciting toy. It’s an ideal project for parents looking to craft a unique gift.
The Speedway in Miniature: The Ultimate Car Ramp Challenge laser cutting project is a toy.
Suitable as a gift for children.
The project uses plywood.
It is an a challenging project, and I estimate the project can be completed in 5 hours. However, your completion time will depend on the laser cutter, the dimensions of the project and your skill level. If you think my time estimates need adjustment, please feel free to let me know via a comment below.
The paid design can be downloaded here. (please notify me if the link is down)
Instructions
Note: the project should be cut from 3mm plywood. Consider applying the stain or dye before laser cutting.
1. Prepare the Materials
- Plywood: Choose a stain or a dye to be applied after laser cutting to enhance the natural wood texture.
2. Prepare the Design File
- Download the design file from the source link provided on the project page.
- Unzip the file to access the design.
- Load the design into your laser cutting software.
3. Set Up the Laser Cutter
- Don't resize; otherwise, the project won't fit together. Move the pieces around to fit onto your plywood.
- Set the appropriate laser parameters:
- Cut: Specify power and speed for clean cuts.
- For the material-specific settings, refer to your laser cutter’s guidelines.
4. Use the Laser Cutter
- Place your material on the laser bed.
- Run the cutting process for all required pieces.
5. Following Laser Cutting
- For Plywood: Wipe smoke marks away with a slightly damp rag. If you still need to, apply the wood stain or dye.
6. Assemble the Pieces
- Use appropriate adhesives:
- Wood Glue for plywood.
- Follow the instructions provided from the place you purchased the design file.
Congratulations on completing your Speedway in Miniature: The Ultimate Car Ramp Challenge. Gift it to a child who loves toy cars, and they can admire the beautiful craftsmanship.
If you enjoyed this project, please share your experience and leave a comment below.
Need help?
- Unsure of the colours to use? Create colour swatches
- View the materials and tools I used to create the items
- View my 50 laser cutting tips
- Leave a question
The completed Speedway in Miniature: The Ultimate Car Ramp Challenge
