Introduction
In this post, we help you create the Stone Rolled Away Laser Cutting Project.
Celebrate faith with this beautifully crafted wooden plaque featuring Matthew 28. Engraved with the passages “Jesus Has Risen” and “The Great Commission,” it includes a serene landscape with three crosses. Perfect for home or church decor, this piece serves as an inspiring reminder of the resurrection and the mission of discipleship.
The Stone Rolled Away laser cutting project is a wall artwork.
Suitable as a gift for all ages.
The project uses plywood.
It is an an easy project, and I estimate the project can be completed in 2.75 hours. However, your completion time will depend on the laser cutter, the dimensions of the project and your skill level. If you think my time estimates need adjustment, please feel free to let me know via a comment below.
The paid design can be downloaded here. (please notify me if the link is down)
Instructions
1. Prepare the Materials
- Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture.
2. Prepare the Design File
- Download the design file from the source link provided on the project page.
- Unzip the file to access the design.
- Load the design into your laser cutting software.
3. Set Up the Laser Cutter
- Adjust the design size to fit your chosen material dimensions.
- Set the appropriate laser parameters:
- Cut: Specify power and speed for clean cuts.
- For the material-specific settings, refer to your laser cutter’s guidelines.
4. Use the Laser Cutter
- Place your material on the laser bed.
- Run the cutting process for all required layers.
- Ensure that the layers align correctly as they are cut.
5. Following Laser Cutting
- For MDF: Wipe smoke marks away with a slightly damp rag. Paint the layers with your chosen colours. Spray paint is preferable to canned paint.
- For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye.
- Use appropriate adhesives:
- Wood Glue for plywood.
- Use clamps to secure the layers while the adhesive dries.
6. Finish the Project
- A gloss spray enhances and protects the artwork for plywood.
7. Prepare for Wall Mounting
- Attach a hanging mechanism, such as adhesive strips, to the back of the artwork.
- Verify that the mechanism is suitable for the wall surface.
Congratulations on completing your Stone Rolled Away! Hang it in your chosen spot and admire the beautiful craftsmanship.
If you enjoyed this project, please share your experience and leave a comment below.
Need help?
- Unsure of the colours to use? Create colour swatches
- View the materials and tools I used to create the items
- View my 50 laser cutting tips
- Leave a question
The completed Stone Rolled Away
