Introduction
In this webpage, we help you create the The Big Apple in Layers Laser Cutting Piece.
Capture the energy of New York City with this stunning laser-cut skyline piece featuring the Statue of Liberty, iconic skyscrapers, and the city’s famous bridges. Made with multiple layers of carefully cut material, this project brings depth and character for NYC lovers or as a unique gift. Click the link to get started and add a piece of the Big Apple to your collection!
- The The Big Apple in Layers laser cutting Piece is a wall artwork.
- Ideal as a gift for all ages.
- This project uses acrylic or MDF or plywood.
- It is an an intermediate Piece, and I expect it should be completed in 3 hours for acrylic, 4 hours for MDF or 3.5 hours for plywood.
However, the total time to complete this will depend on the laser cutter in use, the scale of the project, and your level of experience. If you think the timing should be adjusted, don’t hesitate to let me know via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Assembly guide
Step 1. Prepare all materials for cutting - Acrylic: Choose the acrylic colours and use a protective film if required. - MDF: Prepare MDF by painting it with a white undercoat and selecting paint colours to finish after the laser cutting. - Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture. Step 2. Download and open the design file - download the design file using the source link available on the project page. - Unzip the file to access the SVG. - Load the SVG into your laser cutting software. Step 3. Set up your laser cutter and settings - Adjust the design size to fit your chosen material dimensions. - Set the appropriate laser parameters: - Cut: Specify power and speed for clean cuts. - Refer to the laser cutter manual for recommended material settings. Step 4. Laser cut all design layers - Position your material securely on the laser bed. - Run the cutting process. Step 5. Prepare pieces for assembly - For MDF: Use a damp cloth to remove smoke marks. Paint the layers once clean. Spray paint gives the best finish. - For Plywood: Clean smoke residue with a damp rag, then apply stain or dye. - For Acrylic: Remove protective film after cutting. Step 6. Assemble the layers - Align the layers carefully to ensure proper alignment of the design. - Use appropriate adhesives: - Acrylic Adhesive for acrylic. - Wood Glue for MDF or plywood. - Use clamps to secure the layers while the adhesive dries. When joining the front layers, placing a heavy object on top than using clamps may be more manageable. - For MDF and plywood, use a gloss spray to enhance and protect the artwork. - Attach a hanging mechanism, such as adhesive strips, to the back of the artwork. - Verify that the mechanism is suitable for the wall surface. Fantastic work completing The Big Apple in Layers! Display it proudly and appreciate the detail and effort you’ve put in.
If you enjoyed this project, please share your experience and leave a comment below.
Need help?
- Leave a question
The completed The Big Apple in Layers
