Introduction
In this post, we help you create the Abstract Feminine Flow Laser Cutting Project.
This stunning laser-cut artwork captures the elegant silhouette of a reclining woman from the rear, designed with flowing layers. The piece highlights the natural curves and creates a dynamic interplay of light and shadow. Perfect as a statement wall art or a unique gift, this design offers a sophisticated blend of abstract and realistic elements.
The Abstract Feminine Flow laser cutting project is a wall artwork.
Suitable as a gift for adults.
The project uses acrylic or MDF or Plywood.
It is an an easy project, and I estimate the project can be completed in 1.25 hours for acrylic, 2.25 hours for MDF or 1.75 hours for plywood. However, your completion time will depend on the laser cutter, the dimensions of the project and your skill level. If you think my time estimates need adjustment, please feel free to let me know via a comment below.
The free design can be downloaded here. (please notify me if the link is down)
Instructions
1. Prepare the Materials
- Acrylic: Choose the acrylic colour and use a protective film if required.
- MDF: Prepare MDF by painting it with a white undercoat and selecting a paint colour to finish after the laser cutting.
- Plywood: Choose stains or dyes to be applied after laser cutting to enhance the natural wood texture.
2. Prepare the Design File
- Download the design file from the source link provided on the project page.
- Unzip the file to access the SVG.
- Load the SVG into your laser cutting software.
3. Set Up the Laser Cutter
- Adjust the design size to fit your chosen material dimensions.
- Set the appropriate laser parameters:
- Cut: Specify power and speed for clean cuts.
- For the material-specific settings, refer to your laser cutter’s guidelines.
4. Use the Laser Cutter
- Place your material on the laser bed.
- Run the cutting process.
5. Following Laser Cutting
- For MDF: Wipe smoke marks away with a slightly damp rag. Paint the layers with your chosen colours. Spray paint is preferable to canned paint.
- For Plywood: Wipe smoke marks away with a slightly damp rag. Apply the wood stain or dye.
- For Acrylic: Remove any protective film from the material after cutting.
6. Prepare for Wall Mounting
- Attach a hanging mechanism, such as adhesive strips, to the back of the artwork.
- Verify that the mechanism is suitable for the wall surface.
Congratulations on completing your Abstract Feminine Flow! Hang it in your chosen spot and admire the beautiful craftsmanship.
If you enjoyed this project, please share your experience and leave a comment below.
Need help?
- Unsure of the colours to use? Create colour swatches
- View the materials and tools I used to create the items
- View my 50 laser cutting tips
- Leave a question
The completed Abstract Feminine Flow
